Fast Online Estimate Cost  Analysis
Click here to view this Roman ashlar slate stamped concrete driveway
All About Concrete
Custom Concrete Color Options
Commercial Concrete Construction
Cement has been around for at least 12 million years. When the earth itself was undergoing intense
geologic changes natural, cement was being created. It was this natural cement that humans first put to use.
Eventually, they discovered how to make cement from other materials.

12,000,000 BC
Reactions between limestone and oil shale during spontaneous combustion occurred in Israel to form a
natural deposit of cement compounds. The deposits were characterized by Israeli geologists in the 1960's
and 70's.
3000 BC
Egyptians Used mud mixed with straw to bind dried bricks. They also used gypsum mortars and mortars of
lime in the pyramids.
Chinese Used cementitious materials to hold bamboo together in their boats and in the Great Wall.
800 BC
Greeks, Crete & Cyprus Used lime mortars which were much harder than later Roman mortars.
300 BC
Babylonians & As Syrians Used bitumen to bind stones and bricks.
300 BC - 476 AD
Romans Used pozzolana cement from Pozzuoli, Italy near Mt. Vesuvius to build the Appian Way, Roman
baths, the Coliseum and Pantheon in Rome, and the Pont du Gard aqueduct in south France. They used lime
as a cementitious material. Pliny reported a mortar mixture of 1 part lime to 4 parts sand. Vitruvius reported a
2 parts pozzolana to 1 part lime. Animal fat, milk, and blood were used as admixtures (substances added to
cement to increase the properties.) These structures still exist today!
1200 - 1500
The Middle Ages The quality of cementing materials deteriorated. The use of burning lime and pozzolan
(admixture) was lost, but reintroduced in the 1300's.
1678
Joseph Moxon wrote about a hidden fire in heated lime that appears upon the addition of water.
1779
Bry Higgins was issued a patent for hydraulic cement (stucco) for exterior plastering use.
1780
Bry Higgins published "Experiments and Observations Made With the View of Improving the Art of
Composing and Applying Calcereous Cements and of Preparing Quicklime."
1793
John Smeaton found that the calcination of limestone containing clay gave a lime which hardened under water
(hydraulic lime). He used hydraulic lime to rebuild Eddystone Lighthouse in Cornwall, England which he had
been commissioned to build in 1756, but had to first invent a material that would not be affected by water. He
wrote a book about his work.
1796
James Parker from England patented a natural hydraulic cement by calcining nodules of impure limestone
containing clay, called Parker's Cement or Roman Cement.
1802
In France, a similar Roman Cement process was used.
1810
Edgar Dobbs received a patent for hydraulic mortars, stucco, and plaster, although they were of poor quality
due to lack of kiln precautions.
1812 -1813
Louis Vicat of France prepared artificial hydraulic lime by calcining synthetic mixtures of limestone and clay.
1818
Maurice St. Leger was issued patents for hydraulic cement. Natural Cement was produced in the USA.
Natural cement is limestone that naturally has the appropriate amounts of clay to make the same type of
concrete as John Smeaton discovered.
1820 - 1821
John Tickell and Abraham Chambers were issued more hydraulic cement patents.
1822
James Frost of England prepared artificial hydraulic lime like Vicat's and called it British Cement.
1824
Joseph Aspdin of England invented portland cement by burning finely ground chalk with finely divided clay in a
lime kiln until carbon dioxide was driven off. The sintered product was then ground and he called it portland
cement named after the high quality building stones quarried at Portland, England.
1828
I. K. Brunel is credited with the first engineering application of portland cement, which was used to fill a breach
in the Thames Tunnel.
1830
The first production of lime and hydraulic cement took place in Canada.
1836
The first systematic tests of tensile and compressive strength took place in Germany.
1843 J. M. Mauder, Son & Co. were licensed to produce patented portland cement.
1845
Isaac Johnson claims to have burned the raw materials of portland cement to clinkering temperatures.
1849
Pettenkofer & Fuches performed the first accurate chemical analysis of portland cement.
1860
The beginning of the era of portland cements of modern composition.
1862
Blake Stonebreaker of England introduced the jaw breakers to crush clinkers.
1867
Joseph Monier of France reinforced William Wand's (USA) flower pots with wire ushering in the idea of iron
reinforcing bars (re-bar).
1871
David Saylor was issued the first American patent for portland cement. He showed the importance of true
clinkering.
1880
J. Grant of England show the importance of using the hardest and densest portions of the clinker. Key
ingredients were being chemically analyzed.
1886
The first rotary kiln was introduced in England to replace the vertical shaft kilns.
1887
Henri Le Chatelier of France established oxide ratios to prepare the proper amount of lime to produce
portland cement. He named the components: Alite (tricalcium silicate), Belite (dicalcium silicate), and Celite
(tetracalcium aluminoferrite). He proposed that hardening is caused by the formation of crystalline products of
the reaction between cement and water.
1889
The first concrete reinforced bridge is built.
1890
The addition of gypsum when grinding clinker to act as a retardant to the setting of concrete was introduced in
the USA. Vertical shaft kilns were replaced with rotary kilns and ball mills were used for grinding cement.
1891
George Bartholomew placed the first concrete street in the USA in Bellefontaine, OH. It still exists today!
1893 William Michaelis claimed that hydrated metasilicates form a gelatinous mass (gel) that dehydrates over
time to harden.
1900
Basic cement tests were standardized.
1903
The first concrete high rise was built in Cincinnati, OH.
1908
Thomas Edison built cheap, cozy concrete houses in Union, NJ. They still exist today!
1909
Thomas Edison was issued a patent for rotary kilns.
1929
Dr. Linus Pauling of the USA formulated a set of principles for the structures of complex silicates.
1930
Air entraining agents were introduced to improve concrete's resistance to freeze/thaw damage.
1936
The first major concrete dams, Hoover Dam and Grand Coulee Dam, were built. They still exist today!
1956
U.S. Congress annexed the Federal Interstate Highway Act.
1967
First concrete domed sport structure, the Assembly Hall, was constructed at The University of Illinois, at
Urbana-Champaign.
1970's
Fiber reinforcement in concrete was introduced.
1975
CN Tower in Toronto, Canada, the tallest slip-form building, was constructed.
Water Tower Place in Chicago, Illinois, the tallest building was constructed.

1980's
Superplasticizers were introduced as admixtures.
1985
Silica fume was introduced as a pozzolanic additive.
The "highest strength" concrete was used in building the Union Plaza constructed in Seattle, Washington.

1992
The tallest reinforced concrete building in the world was constructed at 311 S. Wacker Dr., Chicago, Illinois.

2007
AAA Affordable Concrete Contractors of Houston Conquers the Houston market on custom concrete pools,
jacuzzi's, patios, pool decks, foundations, driveways and sidewalks!

Next Topic: Constituent masonry applications  
Residential Custom Concrete Work
Custom Patio & Driveway  Galleries
Random Stone
Decorative Concrete Videos
click here to see how I look with adobe buff and desert tan color hardeners
Structural Engineering & Soil Analysis
Virtual Photo Gallery Online Video Tour
Building a Concrete Driveway
Building a Concrete Patio
London Cobble Driveway
click here to check out this massive 5,038 sq ft stamped concrete driveway we installed in Galveston Texas for Lillyman Bail Bonds
Stamped Concrete Samples
Paver Driveways & Textured Concrete
Stamped Concrete Driveways
What is Stamped Concrete?
Stamped Concrete Designs
European Fan
The Costs of Stamped Concrete
Online Virtual Concrete Design Tools
Decorative Concrete Walkways
Outdoor Kichens & Patio Bars
Concrete Patio Calculator
European Fan
Decorative Concrete Patios
Click here to see the differences between a terracotta cobble stone with medium grey mortar joints versus the exact same style with stone grey hardeners with light grey mortar joints
Stamped Concrete  Walkways
Flagstone Stamped Concrete steps
Contact us to Schedue a  Project
Acid Staining, Engraving Prices
Roman Slate
Exotic Concrete Patio Photos
Swimming Pool  Renovations
Feng Shui & T'ai Chi Design
Are you READY?
Pavers,  Masonry & Pavestone Patios
Natural Flagstone Patios
Decorative Concrete Restoration
Stamped Concrete Patios
Calculate Your Concrete Costs
Company    Profile
Driveway Designing tips
Stamped Flagstone Close up
Patio Bars & Grills
Custom WaterFalls
Polished  Concrete Flooring
Custom Patio Design Studio
Custom Patio Covers
Grande Slate w/ Cobble Path
Custom Arbors & Pergolas
custom cobble stone walkway super-imposed through this texas slate courtyard
Screen Room & Sunrooms
Concrete Pricing Form
Decorative Concrete Forum
Post your Comments
The History of Concrete
Grande Ashlar
Lighted Patios & Fountains
Digital Photo Gallery
Concrete Driveway Specifications
Flagstone Stamped Patios
Concrete Driveway Restoration
Cobblestone Parking Lot
Slate Borders
Slate Driveways
Moroccan Slate
Ashlar Slate Textured Patio
Stamped Overlay
This Stamped Concrete Overlay was installed by our team over an old cracked concrete porch. we are able to resurface, repair or restore virtually any type of concrete surface
Royal Ashlar Patio & Bench
Tunisian Slate Driveway
Custom Built Circular Stamped Concrete Driveway for an engineer at Fluor Daniels
Terms & Conditions of Website Usage & Content:
©2006 ConcreteForever.com  All rights reserved.
No part of this web site may be reproduced without the express written consent of The
Decorative Concrete Network.com
All images on this site are of actual job-site photos of our newly completed projects in and around Houston Texas and are covered
under United States Copyright laws. No images herein may be used, copied, distributed or obtained by illegal downloading

To report technical problems when attempting to use this website please contact the
webmaster.
The History of Concrete:
Article written by Sara Michaels, senior editor  
click me to see how I look close up!